Ghillie Kettle Maverick Anodised - Made in UK

The Ghillie Kettle Maverick 0.5l Aluminium  Anodised Capacity 0.5lt Lightweight just 0.5kg Made in the UK boils 2 mugs The Original One with a whistle!  Fast & Efficient Quick to boil and Lightweight  -  Great for all outdoor activities , No Artificial Fuels required Ghillie Kettle's will burn any organic matter , leaves , sticks even animal dung! The Ghillie Kettle Maverick Anodised Made in the UK , now part of the Newey & Bloomer Family. 

✔ Provides approximately 2 Mugs of water in minutes and is the largest in the range
✔ Lightweight 0.5kg 
✔ Holds up to 0.5ltrs
✔ Height: 27cm
✔ Width: 14cm (at its widest point)
✔ Comes with its own hard wearing carry bag.
✔ Made in the UK 
✔ Aluminium
✔ Anodised Coating - More information 
 

How the Ghillie Kettle Works

You can also find a great video amongst the images to show the Ghillie Kettle in action , using the standard Aluminium Ghillie Kettle , this was kindly provided by The Team @ Ghillie Kettle. 

Water is poured into the spout to approx. 5-10ml below the spout. Warning: do not overfill and do not light when empty.

The whistle is added. Only place the whistle on the spout. Do not push or force it on. Never approach the kettle from the front.

Place fuel (twigs, fir cones, etc,) into the base. 

Light carefully and immediately place the kettle on the base. Once lit the flames will rise through the middle of the chimney. 

The hole at the side of the bottom allows oxygen to be absorbed as the flames rise (you can also add fuel through the centre of the chimney).

The whistle an invaluable safety feature it  blows when the water reaches boiling point. Ghillie Kettle is the original 'one with a whistle'.

Your Ghillie  kettle can be used in harsh, wet and windy conditions.  It's simple to use and doesn't require gas or any other artificial fuels. Just use twigs, fir cones, dry leaves and/or newspaper

Never allow your Ghillie Kettle to boil dry or light when empty -  ​​​Ghillie Kettle Safety Advice

​What does anodised mean?  a little information from Ghillie Kettle  :- 

"The result of anodising is that you get a coating which is scratch resistant and, importantly, unlike stainless steel, none of our kettles rust!
Anodising is primarily used to toughen up the outer shell of the aluminum. What the process actually does is create an aluminium hydroxide layer on the surface of the metal. After the process is complete the aluminum is no longer susceptible to nicks and scratches to the surface because the pores of the metal have tightened up creating a harder surface. However, for normal camping and hiking activities we recommend the normal aluminium kettle which is very robust. Anodised finishes are really only required when the kettle is used during rugged activities and will be exposed to excessive wear and tear.